Quick Detail:
8-bit Microcontroller with 16/32/64K Bytes In-System Programmable
Flash
Description:
The ATmega164P/324P/644P is a low-power CMOS 8-bit microcontroller
based on the AVR enhanced RISC architecture. By executing powerful
instructions in a single clock cycle, the
ATmega164P/324P/644P achieves throughputs approaching 1 MIPS per
MHz allowing the system designer to optimize power consumption
versus processing speed.
The ATmega164P/324P/644P provides the following features: 16/32/64K
bytes of In-System Programmable Flash with Read-While-Write
capabilities, 512B/1K/2K bytes EEPROM, 1/2/4K
bytes SRAM, 32 general purpose I/O lines, 32 general purpose
working registers, Real Time Counter (RTC), three flexible
Timer/Counters with compare modes and PWM, 2 USARTs, a byte
oriented 2-wire Serial Interface, a 8-channel, 10-bit ADC with
optional differential input stage
with programmable gain, programmable Watchdog Timer with Internal
Oscillator, an SPI serial port, IEEE std. 1149.1 compliant JTAG
test interface, also used for accessing the On-chip Debug system
and programming and six software selectable power saving modes. The
Idle mode stops the CPU while allowing the SRAM, Timer/Counters,
SPI port, and interrupt system to continue functioning. The
Power-down mode saves the register contents but freezes the
Oscillator, disabling all other chip functions until the next
interrupt or Hardware Reset. In Powersave mode, the asynchronous
timer continues to run, allowing the user to maintain a timer base
while the rest of the device is sleeping. The ADC Noise Reduction
mode stops the CPU and all I/O modules except Asynchronous Timer
and ADC, to minimize switching noise during ADC conversions. In
Standby mode, the Crystal/Resonator Oscillator is running while the
rest of the device is sleeping. This allows very fast start-up
combined with low power consumption. In Extended Standby mode, both
the main Oscillator and the Asynchronous Timer continue to run.
The device is manufactured using Atmel’s high-density nonvolatile
memory technology. The Onchip ISP Flash allows the program memory
to be reprogrammed in-system through an SPI serial interface, by a
conventional nonvolatile memory programmer, or by an On-chip Boot
program running on the AVR core. The boot program can use any
interface to download the application program in the application
Flash memory. Software in the Boot Flash section will continue to
run while the Application Flash section is updated, providing true
Read-While-Write operation. By combining an 8-bit RISC CPU with
In-System Self-Programmable Flash on a monolithic chip, the Atmel
ATmega164P/324P/644P is a powerful microcontroller that provides a
highly flexible and cost effective solution to many embedded
control applications.
The ATmega164P/324P/644P AVR is supported with a full suite of
program and system development tools including: C compilers, macro
assemblers, program debugger/simulators, in-circuit
emulators, and evaluation kits.
Applications:
• High-performance, Low-power AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 131 Powerful Instructions – Most Single-clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
– On-chip 2-cycle Multiplier
• Nonvolatile Program and Data Memories
– 16/32/64K Bytes of In-System Self-Programmable Flash
Endurance: 10,000 Write/Erase Cycles
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– 512B/1K/2K Bytes EEPROM
Endurance: 100,000 Write/Erase Cycles
– 1/2/4K Bytes Internal SRAM
– Programming Lock for Software Security
• JTAG (IEEE std. 1149.1 Compliant) Interface
– Boundary-scan Capabilities According to the JTAG Standard
– Extensive On-chip Debug Support
– Programming of Flash, EEPROM, Fuses, and Lock Bits through the
JTAG Interface
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescalers and Compare
Modes
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode,
and Capture Mode
– Real Time Counter with Separate Oscillator
– Six PWM Channels
– 8-channel, 10-bit ADC
Differential mode with selectable gain at 1x, 10x or 200x
– Byte-oriented Two-wire Serial Interface
– Two Programmable Serial USART
– Master/Slave SPI Serial Interface
– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
– Interrupt and Wake-up on Pin Change
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save,
Power-down, Standby
and Extended Standby
• I/O and Packages
– 32 Programmable I/O Lines
– 40-pin PDIP, 44-lead TQFP, and 44-pad QFN/MLF
• Operating Voltages
– 1.8 - 5.5V for ATmega164P/324P/644PV
– 2.7 - 5.5V for ATmega164P/324P/644P
• Speed Grades
– ATmega164P/324P/644PV: 0 - 4MHz @ 1.8 - 5.5V, 0 - 10MHz @ 2.7 -
5.5V
– ATmega164P/324P/644P: 0 - 10MHz @ 2.7 - 5.5V, 0 - 20MHz @ 4.5 -
5.5V
•Power Consumption at 1 MHz, 1.8V, 25°C for ATmega164P/324P/644P
– Active: 338/398/TBD µA
– Power-down Mode:0.035 /0.027/TBD µA
- Power-save Mode:0.5 /0.5/TBD µA (Including 32 kHz RTC)
Specifications:
Datasheets | ATMEGA164/324/644(P,V) |
Product Photos | 44-QFN Pkg |
Product Training Modules | MCU Product Line Introduction
megaAVR Introduction |
Standard Package | 360 |
Category | Integrated Circuits (ICs) |
Family | Embedded - Microcontrollers |
Series | AVR® ATmega |
Packaging | Tray |
Core Processor | AVR |
Core Size | 8-Bit |
Speed | 10MHz |
Connectivity | I²C, SPI, UART/USART |
Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
Number of I /O | 32 |
Program Memory Size | 64KB (32K x 16) |
Program Memory Type | FLASH |
EEPROM Size | 2K x 8 |
RAM Size | 4K x 8 |
Voltage - Supply (Vcc/Vdd) | 1.8 V ~ 5.5 V |
Data Converters | A/D 8x10b |
Oscillator Type | Internal |
Operating Temperature | -40°C ~ 85°C |
Package / Case | 44-VFQFN Exposed Pad |
For Use With | ATSTK600-ND - DEV KIT FOR AVR/AVR32 |
Other Names | ATMEGA644PV10MU
Q3423944 |
Competitive Advantage:
Warranty :180 days !
Free shipping: Order over $1000 win a free shipment fee
(goods weight below 3Kg) ,during 20130901-20130930 .
Why buy from us >>> Fast / Safely / Conveniently
• Mega Source is a Stock keeper and trade company of Electronic
components .Our branches office include China, Hong Kong, Sigapore
, Canada . Offer business, service, resourcing and information for
our global member.
• Goods are ensured the highest quality possible and are delivered
to our customers all over the world with speed and precision.
How to buy >>>
• Contact us by email & sent your inquire with your Transport
destination .
• Online chat, the commissioner would be responded ASAP.
Service >>>
• Forwarder Shipment to world-wide, DHL ,TNT ,UPS,FEDEX etc. buyer
don`t need to worry about shipping problem
• We will try to respond as quickly as possible. But due to time
zone difference, please allow up to 24 hours to get your mail
replied. The products were tested by some devices or software, we
ensure that there is no quality problems.
• We are committed to providing fast, convenient and safe
transportation service to global buyer.
